xxvi Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • December 2004
FIGURE 13-13 Securing the Front Fan Cable in the Bezel Cable Clip 13–14
FIGURE 13-14 Rear Fan Location and Identification 13–16
FIGURE 13-15 Rear Fan Motherboard Connection 13–17
FIGURE 13-16 Removing the Rear Fan 13–18
FIGURE 13-17 Installing the Rear Fan Bracket 13–19
FIGURE 13-18 Securing the Rear Fan Bracket 13–20
FIGURE 13-19 Connecting the Rear Fan Cable to FAN1 SYS 13–21
FIGURE 13-20 DIMM Cooling Duct Location and Identification. 13–23
FIGURE 13-21 DIMM Cooling Duct Attachment to Rear Fan 13–24
FIGURE 13-22 Pressing the Catch on the Rear Fan Bracket 13–24
FIGURE 13-23 Sliding the Duct to the Left 13–25
FIGURE 13-24 Swinging Out the Duct 13–25
FIGURE 13-25 Sliding Duct Back to the Right 13–26
FIGURE 13-26 Pulling the Duct Free 13–26
FIGURE 13-27 Aligning the Pivot Pins With the Gap 13–27
FIGURE 13-28 Moving the Duct to the Left 13–28
FIGURE 13-29 Swinging the Duct In 13–28
FIGURE 13-30 Ejector Levers Closed Position 13–29
FIGURE 13-31 Sliding the Duct to the Right 13–29
FIGURE 13-32 Duct Clicks Into Place 13–30
FIGURE 13-33 Audio USB board Location and Identification 13–31
FIGURE 13-34 Disconnecting the Cables From the Motherboard 13–32
FIGURE 13-35 Removing the Audio USB Cables From the I/O Cable Clip 13–33
FIGURE 13-36 Unfastening the Audio USB Assembly 13–34
FIGURE 13-37 Removing the Audio USB Board From the Bracket 13–35
FIGURE 13-38 Installing the Audio USB Board Into the Bracket 13–36
FIGURE 13-39 Securing the Audio USB Assembly 13–37
FIGURE 13-40 Reconnecting the Cables to the Motherboard 13–37
FIGURE 13-41 Securing the Audio USB Cables in the I/O Cable Clip 13–38
FIGURE 13-42 Speaker Location and Identification 13–39
To Next Page
Loading...
