Chapter 16 Customizing Your System 16-3
Fibre channel host
adapters
Single-Loop PCI FC-AL
Host Adapter
Dual-Loop PCI FC-AL
Host Adapter
There are no special conditions for basic installation.
2GB PCI Single Fiber
Channel Network Host
Bus Adapter
2GB PCI Dual Fiber
Channel Network Host
Bus Adapter
Install the following packages:
• SUNWsan
• SUNWcfpl
• SUNWcfplx
Install the following qpatches:
• Q958611
• Q958612
Communication
interfaces
SunHSI/P™ High Speed
Serial Interface - 4 port
2.0
The SunHSI/P card does not fit into the 66 MHz slot, PCI4.
Install the following packages from the supplemental
software CD-ROM:
• SUNWhsip
• SUNWhsipm
• SUNWhsipu
SunSAI/P Serial
Asynchronous Interface -
8 port 3.0
Installing more than one card requires additional
considerations and running the saipconfig configuration
script. Refer to the SunSAI/P User’s Guide, 806-4206, for more
information.
Install the following packages:
• SUNWsaip
• SUNWsaipu
Ethernet interfaces GigaSwift Ethernet
Gigabit Ethernet 3.0
SunFastEthernet™
There are no special conditions for basic installation.
Sun Quad
FastEthernet™
PCI card to Sun Blade 1500 chassis tolerances are tight.
Connecting some network cables might require additional
effort.
Install only in slot PCI4.
Sun PCi co-
processor
SunPCi III Pro Optional installation of the USB/Firewire® backplate
and/or serial/parallel port backplate occupies adjacent PCI
slots.
Install the following packages:
• SUNWspci3
• SUNWspvn3
For Microsoft Windows functionality, a licensed version of
Windows must be installed.
TABLE 16-1 Conditions for Installing Optional PCI Cards (Continued)
Card Type Product Conditions for Installation
To Next Page
Loading...
