3-10 Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • December 2004
Invalid null
command
Typographical error when using the pipe (|).
For example, a double pipe or no command
following a pipe.
Check the format of the
command.
I/O error
Hardware error has occurred on storage
device.
Check device media. If a hard
drive, run
fsck.
process killed
Swap space is too small or stack size is too
large.
Check swap space. Set stack
size to 8192.
ld.so.1
Runtime linker could not find file or symbol.
Swap space has been diminished by rogue
program. Memory leak.
Check for missing file. Reboot
system.
No carrier
Network connection faulty. Check network connection.
See
“Network Problem” on
page 4-17.
Network is down
Network connection faulty. Check network connection.
See
“Network Problem” on
page 4-17.
Network is
unreachable
There is no route to network, or gateways are
refusing packets.
Check network security.
NFS read failed for
server
File-sharing permissions changed while the
file was open.
Close the file and reset the
permissions.
NFS server not
responding still
trying
NFS server is down or slow to respond. NFS
server network connection might be down.
Check resource load and
network connection of NFS
server.
No child process
Application is trying to communicate with
subprocess that does not exist.
Restart the parent process.
No default media
available
No removable media exists or volume
manager is confused.
Insert media or update the
volume manager with the
volcheck command.
No such device
Device does not exist. Check hardware connections
of suspect device.
No utmpx entry
File system is full. In single-user mode, zero-out
the
/var/adm/utmp and
/var/adm/utmpx files.
Bring system up and clean out
large files starting in the
/var
directory.
TABLE 3-3 Solaris Error Messages and Their Meanings (Continued)
Message Meaning What to do
To Next Page
Loading...
