Sun Microsystems Blade 1500 - Page 78

3-24 Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • December 2004
3.3.4.2 Examples
The following examples show output for the netstat command and its options.
-r
Displays the routing table. Provides routing information.
-n
Replaces host names with IP
addresses.
When an address is more useful than a host name.
# netstat -i 1
input bge0 output input (Total) output
packets errs packets errs colls packets errs packets errs colls
32703 0 23906 0 0 35527 0 26730 0 0
3 0 0 0 0 5 0 2 0 0
3 0 0 0 0 5 0 2 0 0
5 0 0 0 0 7 0 2 0 0
4 0 0 0 0 6 0 2 0 0
3 0 0 0 0 5 0 2 0 0
3 0 0 0 0 5 0 2 0 0
. . .
TABLE 3-9 Options for netstat (Continued)
Option Description How It Can Help