viii Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • December 2004
10.3.2 Powering Off Methods 10–5
10.4 Removing the Access Panel 10–12
10.5 Removing the Bezel 10–14
10.6 Positioning the Chassis 10–16
10.7 Finding Your Replacement Procedures 10–18
11. Replacing the Motherboard and Associated Components 11–1
11.1 Replacing the DIMMs 11–2
11.1.1 Identifying the DIMMs 11–2
11.1.2 Removing DIMMs 11–3
11.1.3 Installing DIMMs 11–7
11.1.4 OpenBoot PROM Memory Message 11–12
11.2 Replacing the CPU Fan and Heat Sink Assembly 11–13
11.2.1 Identifying the CPU Fan and Heat Sink Assembly 11–13
11.2.2 Removing the CPU Fan and Heat Sink Assembly 11–14
11.2.3 Installing the CPU Fan and Heat Sink Assembly 11–18
11.3 Replacing the Battery 11–22
11.3.1 Identifying the Battery 11–23
11.3.2 Removing the Battery 11–23
11.3.3 Installing the Battery 11–24
11.4 Replacing the NVRAM 11–25
11.4.1 Identifying the NVRAM 11–26
11.4.2 Removing the NVRAM 11–26
11.4.3 Installing the NVRAM 11–27
11.5 Replacing the PCI Cards 11–28
11.5.1 Identifying the PCI Cards 11–29
11.5.2 Removing a PCI Card 11–30
11.5.3 General PCI Card Guidelines 11–33
11.5.4 Special Considerations for Graphics Accelerators 11–34
To Next Page
Loading...
