CMS32L051 User Manual |Chapter 4 Clock Generation Circuit
www.mcu.com.cn 74 / 703
Figure 4-7 Format of peripheral enable register 0 (PER0) (3/3)
Address: 40020 420H After reset: 00H R/W
symbol
PER0
Provides control of the input clock of the general-purpose timer unit 1
Stop supplying the input clock.
used by universal timer unit 1.
1 is in a reset state.
An input clock is provided.
1.
Provides control of the input clock of the general-purpose timer unit 0
Stop supplying the input clock.
0.
0 is in the reset state.
An input clock is provided.
To Next Page
Loading...