EasyManua.ls Logo

ST STM32F446 Series

ST STM32F446 Series
1328 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
RM0390 Rev 4 1213/1328
RM0390 USB on-the-go full-speed/high-speed (OTG_FS/OTG_HS)
1264
else if (DTERR)
{
Reset Error Count
}
The application is expected to write the requests as and when the request queue space is
available and until the XFRC interrupt is received.
Bulk and control IN transactions
A typical bulk or control IN pipelined transaction-level operation is shown in Figure 413.
See channel 2 (ch_2). The assumptions are:
The application is attempting to receive two maximum-packet-size packets
(transfer size = 1 024 bytes).
The receive FIFO can contain at least one maximum-packet-size packet and two
status words per packet (72 bytes for FS/520 bytes for HS).
The non-periodic request queue depth = 4.

Table of Contents

Other manuals for ST STM32F446 Series

Related product manuals