Sun Microsystems Blade 1500 - Page 137

Chapter 6 NVRAM 6-5
screen-#columns 80 The number of character columns
displayed on the console.
screen-#rows 34 The number of character rows displayed on
the console.
ttyb-rts-dtr-off false A value of false disables hardware
handshaking for ttyb (serial2
).
ttyb-ignore-cd true A value of true ignores carrier detect for
ttyb (serial 2
).
ttya-rts-dtr-off false A value of false disables hardware
handshaking for ttya (serial1
).
ttya-ignore-cd true A value of true ignores carrier detect for
ttya (serial 1
).
ttyb-mode 9600,8,n,1,- The communication parameters for ttyb
(serial2
). 9600 baud, 8 data bits, no
parity, 1 stop bit, no handshaking.
ttya-mode 9600,8,n,1,- The communication parameters for ttya
(serial1
). 9600 baud, 8 data bits, no
parity, 1 stop bit, no handshaking
output-device screen The device alias of the console output
display. screen is aliased to the first
graphics accelerator found in probe order.
input-device keyboard The device alias of the console input
device.
auto-boot-on-error? false A value of false disables autoboot upon
error.
error-reset-recovery sync The command to be executed upon
recovery from an error.
load-base 16384 The decimal address of the start of the
client program.
auto-boot? true A value of true enables the system to boot
the Solaris operating system without
intervention.
boot-command boot The string which is aliased to the action of
booting the system.
diag-file The path and filename of the diagnostics
file.
diag-device net The device alias of the hardware which has
the diagnostics file.
TABLE 6-2 NVRAM Configuration Parameter Default Values (Continued)
Parameter Default Value Description
2
2
1
1
2
1