Sun Microsystems Blade 1500 - Page 138

6-6 Sun Blade 1500 Service, Diagnostics, and Troubleshooting Manual • December 2004
More information about the NVRAM configuration parameters is available from the
eeprom man page.
boot-file The path and filename of the boot file.
boot-device disk net The device alias of the hardware which has
the boot file. Aliases may be separated by a
space, and are checked in left to right order.
use-nvramrc? false A value of false disables use of the
information in the nvramrc space.
nvramrc A storage space for special conditions and
variables used for booting the system.
security-mode No default Firmware security level.
security-password No default Firmware security password.
security-#badlogins No default The number of failed security password
attempts.
verbosity min A value of min provides almost no output
during diagnostics.
diag-trigger none Reserved.
service-mode? false Reserved.
diag-script none The name of the diagnostics script.
diag-level max A value of max enables enhanced
diagnostics.
diag-switch? false A value of false disables diagnostics
under the OpenBoot PROM.
TABLE 6-2 NVRAM Configuration Parameter Default Values (Continued)
Parameter Default Value Description