Figures xxiii
FIGURE 10-9 Bezel Location and Identification 10–15
FIGURE 10-10 Releasing the Bezel Mounting Tabs 10–15
FIGURE 10-11 Removing the Bezel 10–16
FIGURE 10-12 Positioning the Chassis 10–17
FIGURE 10-13 Replaceable Components 10–18
FIGURE 11-1 DIMM Location and Identification 11–3
FIGURE 11-2 Location of DIMMs Under Cooling Duct 11–4
FIGURE 11-3 Pressing the Catch on the Rear Fan Bracket 11–4
FIGURE 11-4 Sliding the Duct Up 11–5
FIGURE 11-5 Flipping the Duct Over 11–5
FIGURE 11-6 Removing the DIMM 11–6
FIGURE 11-7 Lifting the DIMM Out of the Slot 11–7
FIGURE 11-8 Aligning the DIMM 11–9
FIGURE 11-9 Securing the DIMM 11–9
FIGURE 11-10 Flipping DIMM Cooling Duct Back 11–10
FIGURE 11-11 Ejector Levers Closed Position 11–10
FIGURE 11-12 Sliding the Duct Down 11–11
FIGURE 11-13 Examples of Faulty DIMM Locations 11–13
FIGURE 11-14 CPU Fan and Heat Sink Assembly Location and Identification 11–14
FIGURE 11-15 Disconnecting the CPU Fan and Heat Sink Assembly Cable 11–15
FIGURE 11-16 Pressing Down on the Clip Latch 11–16
FIGURE 11-17 Releasing the CPU Fan and Heat Sink Assembly Clips 11–16
FIGURE 11-18 Rotating CPU Fan and Heat Sink Assembly 11–17
FIGURE 11-19 Lifting the CPU Fan and Heat Sink Assembly Away 11–18
FIGURE 11-20 Setting the CPU Fan and Heat Sink Assembly on the CPU 11–19
FIGURE 11-21 Aligning the Clips Over the Locking Ring 11–20
FIGURE 11-22 Hooking Clip Over End Tab 11–20
FIGURE 11-23 Securing the Clip to the Locking Ring 11–21
FIGURE 11-24 Connecting the CPU Fan and Heat Sink Assembly Cable 11–21
FIGURE 11-25 Battery Location and Identification 11–23
To Next Page
Loading...
