CAUTION
DO NOT TIGHTEN THE FILTER COVER TO PUSH THE FILTER ELEMENT
INTO THE HOUSING. IF YOU DO, DAMAGE TO THE FILTER ELEMENT
CAN OCCUR.
(g) Install the filter cover [4].
(h) Tighten the filter cover to 156 in-lb (17.6 N·m) - 180 in-lb (20.3 N·m).
(i) Install the 0.032 in. (0.8128 mm) diameter MS20995C32 lockwire, G01048, or safety
cable kit, G51526, or safety cable kit, G51490, onto the filter cover. Refer to: Lockwire,
Cotter Pins, and Lockrings - Installation, TASK 20-10-44-400-801 or Safety Cable
Installation, TASK 20-10-44-400-802.
(j) Do this task: IDG Servicing (Oil Fill), TASK 12-13-21-600-801.
1) Make sure that the drain plug is installed, with a new o-ring, prior to fill the IDG with
oil.
(k) Do this task: Dry Motor the Engine, TASK 71-00-00-700-821-F00.
(l) Do a general visual inspection for leaks in the scavenge filter.
F. Put the Airplane Back to Its Usual Condition
SUBTASK 24-11-41-410-001
(1) Do this task: Close the Fan Cowl Panels, TASK 71-11-02-410-801-F00.
END OF TASK
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
24-11-41
Page 209
D633A101-ILF Oct 15/2019
ECCN 9E991 BOEING PROPRIETARY - Copyright © Unpublished Work - See title page for details
EFFECTIVITY
ILF ALL
To Next Page
Loading...
