TASK 30-11-11-400-801
3. Wing Thermal Anti-Icing Shutoff Valve Installation
(Figure 401)
A. General
(1) This task gives instructions to install the Wing Thermal Anti-Icing Shutoff Valve.
B. References
Reference Title
24-22-00-860-814 Remove External Power (P/B 201)
27-81-00-040-801 Leading Edge Flaps and Slats - Deactivation (P/B 201)
27-81-00-440-801 Leading Edge Flaps and Slats - Activation (P/B 201)
30-11-00-790-801 Wing Anti-Icing Duct - Leak Test (P/B 501)
30-11-11-710-801 Wing Thermal Anti Icing Shutoff Valve Test (P/B 501)
SSM 30-11-11 System Schematics Manual
SWPM 20-20-00 ELECTRICAL BONDING PROCESSES
WDM 30-11-11 Wiring Diagram Manual
C. Tools/Equipment
NOTE: When more than one tool part number is listed under the same "Reference" number, the
tools shown are alternates to each other within the same airplane series. Tool part numbers
that are replaced or non-procurable are preceded by "Opt:", which stands for Optional.
Reference Description
COM-1550 Bonding Meters - Approved, Intrinsically Safe (Approved for use in
Class I, Divisions I & II hazardous (classified) locations. Outside
these hazardous locations, COM-614 can be used in lieu of
COM-1550).
737-600, -700, -800
Part #: 620LK Supplier: 1CRL2
Part #: M1 Supplier: 3AD17
Part #: T477W (C15292) Supplier: 01014
Opt Part #: M1B Supplier: 3AD17
D. Consumable Materials
Reference Description Specification
B00130 Alcohol - Isopropyl TT-I-735
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
30-11-11
Page 404
D633A101-ILF Oct 15/2019
ECCN 9E991 BOEING PROPRIETARY - Copyright © Unpublished Work - See title page for details
EFFECTIVITY
ILF ALL
To Next Page
Loading...
