SUBTASK 24-41-11-420-007-001
(3) Do these steps to install the doubler [19] and shield [18] to the receptacle [1]:
(a) Put the doubler [19] in its position.
1) Apply sealant, A50419 to the surface of the doubler [19].
(b) Put the shield [18] in its position.
(c) Install the washers [16] and nuts [17].
1) Tighten the nuts [17] to 30 ±5 in-lb (3.4 ±0.6 N·m).
I. Put the Airplane Back to Its Usual Condition
SUBTASK 24-41-11-410-009-001
(1) Close this access panel:
Number Name/Location
114AR External Power Receptacle Door
END OF TASK
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
24-41-11
Config 1
Page 413
D633A101-ILF Oct 15/2019
ECCN 9E991 BOEING PROPRIETARY - Copyright © Unpublished Work - See title page for details
EFFECTIVITY
ILF 491-495, 497, 559, 563, 564, 588-590, 592, 972, 980-999; ILF 101, 151,
156-199, 301, 304, 308, 310, 314, 315, 317-319, 323, 331-399, 401, 402, 405, 406,
409, 410, 412, 416, 424, 425, 427-429, 451, 452, 496, 498-504, 507-510, 512-516,
518-520, 523-528, 530-533, 535-537, 541, 542, 552-557, 560-562, 567-569,
571-577, 581, 583, 585, 671, 672, 703, 707-710, 803-813, 821, 822, 831, 832, 836,
837, 841, 842, 851, 852, 854-858, 861-863, 871-874, 947, 948, 968-971, 973 POST
SB 737-24-1198
To Next Page
Loading...
