QAD ADAPTER - REMOVAL/INSTALLATION
1. General
A. This procedure has two tasks:
(1) QAD Adapter Removal
(2) QAD Adapter Installation.
TASK 80-11-02-000-801-F00
2. QAD Adapter Removal
(Figure 401)
A. General
(1) This task provides the instructions on how to remove the QAD adapter.
B. References
Reference Title
71-11-02-010-801-F00 Open the Fan Cowl Panels (P/B 201)
80-11-01-000-801-F00 Starter Removal (P/B 401)
C. Tools/Equipment
Reference Description
STD-1280
Source - Air, Regulated, Dry Filtered, 0-30 PSIG
D. Consumable Materials
Reference Description Specification
B00682 [CP2011] Solvent - Stoddard MIL-PRF-680 Type I, II
or III
G00034 Cotton Wiper - Process Cleaning Absorbent
Wiper (Cheesecloth, Gauze)
BMS15-5 Class A
E. Location Zones
Zone Area
411 Engine 1 - Engine
421 Engine 2 - Engine
F. Prepare for the Removal
SUBTASK 80-11-02-010-002-F00
(1) Do this task: Open the Fan Cowl Panels, TASK 71-11-02-010-801-F00.
SUBTASK 80-11-02-020-001-F00
(2) Do this task: Starter Removal, TASK 80-11-01-000-801-F00.
G. QAD Adapter Removal
SUBTASK 80-11-02-000-001-F00
(1) Remove the QAD adapter [1]:
(a) Remove the eight bolts [4] and the washers [3] that attach the QAD adapter [1] to the
AGB.
(b) Remove the QAD adapter [1] from the AGB.
(c) Remove and discard the packing [2].
SUBTASK 80-11-02-210-001-F00
(2) Examine the QAD adapter area for metal chips:
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
CFM56 ENGINES (CFM56-7)
80-11-02
Page 401
D633A101-ILF Oct 15/2018
ECCN 9E991 BOEING PROPRIETARY - Copyright © Unpublished Work - See title page for details
EFFECTIVITY
ILF ALL
To Next Page
Loading...
