EasyManua.ls Logo

Boeing 737-600 - Task 24-11-41-400-801 - IDG Scavenge and Charge Filter - Installation; Subtask 24-11-41-420-001

Boeing 737-600
2300 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TASK 24-11-41-400-801
4. IDG Scavenge and Charge Filter - Installation
(Figure 201)
NOTE: This procedure is a scheduled maintenance task.
A. General
(1) The IDG Scavenge Filter and Charge Filter elements are the same.
(2) Do not reinstall a used filter element, even if it looks clean. Always install a new filter element.
B. References
Reference Title
12-13-21-600-801 IDG Servicing (Oil Fill) (P/B 301)
20-10-44-400-801 Lockwire, Cotter Pins, and Lockrings - Installation (P/B 401)
20-10-44-400-802 Safety Cable Installation (P/B 401)
71-00-00-700-821-F00 Dry Motor the Engine (P/B 201)
71-11-02-410-801-F00 Close the Fan Cowl Panels (P/B 201)
C. Consumable Materials
Reference Description Specification
D00068 Oil - Aircraft Turbine Engine, Synthetic Base MIL-PRF-23699 Class
STD (Standard)
D00071 Oil - Aircraft Turbine Engine, Synthetic Base MIL-PRF-7808 Grade 3
G01048 Lockwire - MS20995C32, Corrosion Resistant
Steel - 0.032 Inch (0.8128 mm) Diameter
NASM20995
G51490 Kit - Safety Cable, 321 CRES - 0.032 Inch
(0.81 mm) Diameter, (Contains both Cable
and Ferrule), 18 Inches Long
BACC13AT3K18, AMS
5689
G51526 Kit - Safety Cable, 321 CRES - 0.022 Inch
(0.56 mm) Diameter, (Contains both Cable
and Ferrule), 18 Inches Long
BACC13AT2K18,
AMS5689
D. Expendables/Parts
AMM Item Description AIPC Reference AIPC Effectivity
2 Element 24-11-11-50-105 ILF ALL
3 O-ring 24-11-11-50-100 ILF ALL
E. IDG Scavenge and Charge Filter Installation
SUBTASK 24-11-41-420-001
(1) Install the filter element as follows:
(a) Apply oil, D00071, or oil, D00068, on the o-ring [3].
(b) Install the new o-ring [3] on the filter cover [4].
(c) Make sure that the o-ring [1] is on the new element [2].
NOTE: The o-ring comes installed in the element.
(d) Apply oil, D00071, or oil, D00068, on the o-ring [1].
(e) Install the element [2] in the cavity on the IDG until o-ring [1] on filter element makes a
seal.
(f) Make sure that filter element is properly seated into the IDG cavity before you install the
filter cover.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
24-11-41
Page 208
D633A101-ILF Oct 15/2019
ECCN 9E991 BOEING PROPRIETARY - Copyright © Unpublished Work - See title page for details
EFFECTIVITY
ILF ALL

Table of Contents

Related product manuals