(a) Make the fillet seal to 0.03 in. (0.76 mm) by 0.03 in. (0.76 mm).
NOTE: If more sealant is necessary for the fillet seal, use sealant, A00436 Class B.
SUBTASK 53-31-11-410-004
(5) After the adhesive dries, (Table 57-32-00-993-802), apply paint to the nose section surface if it
is necessary.
Table 401/53-31-11-993-801 Cure Time For BMS 5-44 (Class B) and BMS 5-45 (Class B)
Adhesive Cure Time
BMS 5-44 Class B-1/2 24 hours at standard conditions
BMS 5-44 Class B-2 48 hours at standard conditions
BMS 5-45 Class B-1/2 12 hours at standard conditions
BMS 5-45 Class B-2 24 hours at standard conditions
END OF TASK
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
53-31-11
Page 407
D633A101-ILF Jun 15/2019
ECCN 9E991 BOEING PROPRIETARY - Copyright © Unpublished Work - See title page for details
EFFECTIVITY
ILF 491-500, 559-564, 567-569, 577, 581, 583, 585,
588-590, 592-599, 601-603, 606, 607, 610-615, 620,
625-627, 671, 672, 691-699, 832-838, 841, 842, 851,
852, 857, 858, 874, 947, 948, 968-973, 980-999
To Next Page
Loading...
