F. Standby Power Control Unit Removal
SUBTASK 24-34-11-910-001
CAUTION
DO NOT TOUCH THE CONTROL UNIT BEFORE YOU DO THE PROCEDURE
FOR DEVICES THAT ARE SENSITIVE TO ELECTROSTATIC DISCHARGE.
ELECTROSTATIC DISCHARGE CAN CAUSE DAMAGE TO THE CONTROL
UNIT.
(1) Before you touch the SPCU [1], do this task: ESDS Handling for Metal Encased Unit Removal,
TASK 20-40-12-000-802.
SUBTASK 24-34-11-020-001
(2) To remove the SPCU [1] from the P6 panel, do these steps:
(a) Loosen the captive screws [2] from the front of the SPCU [1] to remove it from the P6
panel.
(b) Remove the electrical connector [3] from the back of the SPCU [1].
(c) Put the protective covers on the electrical connector [3].
END OF TASK
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
24-34-11
Page 402
D633A101-ILF Oct 15/2017
ECCN 9E991 BOEING PROPRIETARY - Copyright © Unpublished Work - See title page for details
EFFECTIVITY
ILF ALL
To Next Page
Loading...
