STATIC INVERTER - REMOVAL/INSTALLATION
1. General
A. This procedure has these tasks:
(1) Static Inverter Removal.
(2) Static Inverter Installation.
TASK 24-34-21-000-801
2. Static Inverter Removal
(Figure 401)
A. General
(1) The M9 Static Inverter is located on the E2-2 equipment rack in the main equipment center.
B. References
Reference Title
20-10-07-000-801 E/E Box Removal (P/B 201)
20-40-12-000-802 ESDS Handling for Metal Encased Unit Removal (P/B 201)
C. Location Zones
Zone Area
117 Electrical and Electronics Compartment - Left
D. Access Panels
Number Name/Location
117A Electronic Equipment Access Door
E. Prepare for the Removal
SUBTASK 24-34-21-860-001
CAUTION
DO NOT DISCONNECT THE BATTERY CHARGER BEFORE YOU OPEN THE
CIRCUIT BREAKERS. WITH THE BATTERY SWITCH IN THE OFF POSITION,
THE BATTERY WILL CONTINUE TO ENERGIZE THE POSITIVE TERMINAL
OF THE BATTERY CHARGER. IF YOU DISCONNECT THE BATTERY
CHARGER BEFORE YOU OPEN THE CIRCUIT BREAKERS, YOU CAN
CAUSE DAMAGE TO THE BATTERY CHARGER.
(1) Open this circuit breaker and install safety tag:
Standby Power Control Unit, M01720
Row Col Number Name
A 5 C01343 INVERTER REMOTE
SUBTASK 24-34-21-860-003
(2) Open this access panel:
Number Name/Location
117A Electronic Equipment Access Door
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
24-34-21
Page 401
D633A101-ILF Jun 15/2019
ECCN 9E991 BOEING PROPRIETARY - Copyright © Unpublished Work - See title page for details
EFFECTIVITY
ILF ALL
To Next Page
Loading...
