SUBTASK 47-43-02-020-001
(3) Disconnect the electrical connector [1].
SUBTASK 47-43-02-020-002
(4) Do these steps to remove the thermal switch [2]:
(a) Remove the lockwire (TASK 20-10-44-000-801).
(b) Remove the thermal switch [2] from the duct [4].
NOTE: Use a second wrench on the duct [4] when you disconnect the thermal switch [2].
(c) Discard the O-ring [3].
(d) Put a protective cap on the thermal switch port of the duct [4].
END OF TASK
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
47-43-02
Page 403
D633A101-ILF Oct 15/2019
ECCN 9E991 BOEING PROPRIETARY - Copyright © Unpublished Work - See title page for details
EFFECTIVITY
ILF 402, 452, 509, 510, 523, 525-528, 568, 569, 576, 577, 581, 583, 585, 588-590,
592-599, 601-603, 606, 607, 610-615, 620, 625-627, 691-699, 833-835, 838, 971, 980-999;
ILF 101, 151, 156-199, 301, 304, 308, 310, 314, 315, 317-319, 323, 331-399, 401, 405,
406, 409, 410, 412, 416, 424, 425, 427-429, 451, 501-504, 507, 508, 512-514, 516, 518,
524, 531-533, 535-537, 541, 542, 552-556, 560-562, 567, 571-575, 671, 672, 686, 703,
707-710, 803-813, 821, 822, 831, 832, 836, 837, 841, 842, 851, 852, 854-858, 861-863,
871-874, 947, 948, 968-970, 972, 973 POST SB 737-47-1003
To Next Page
Loading...
