(i) If it is necessary, remove these parts from the resolver:
1) Remove and discard the cotter pin [56].
2) Remove the seal nut [54] with the seal nut wrench.
NOTE: The seal nut wrench is part of auto throttle servo assembly tool set,
SPL-2414.
3) Remove the scraper [55].
SUBTASK 76-11-05-020-010-F00
(9) Remove the brake assembly [10] as follows:
(a) Move the brake assembly [10] from the autothrottle shaft [49].
END OF TASK
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
CFM56 ENGINES (CFM56-7)
76-11-05
Page 404
D633A101-ILF Oct 15/2018
ECCN 9E991 BOEING PROPRIETARY - Copyright © Unpublished Work - See title page for details
EFFECTIVITY
ILF ALL
To Next Page
Loading...
