A. Location Zones
Zone Area
115 Nose Landing Gear Wheel Well - Left
116 Nose Landing Gear Wheel Well - Right
117 Electrical and Electronics Compartment - Left
118 Electrical and Electronics Compartment - Right
B. Access Panels
Number Name/Location
117A Electronic Equipment Access Door
C. Inspection
SUBTASK 53-05-02-010-046
(1) Open this access panel:
Number Name/Location
117A Electronic Equipment Access Door
NOTE: Access through E/E Bay Aft of Nose Wheel Well.
SUBTASK 53-05-02-250-023
(2) Do a High Frequency Eddy Current inspection around the fasteners in the WL 172 beam just
outboard of LBL 17 and RBL 17 at the nose wheel well Aft bulkhead.
See Doc. D626A001-DTR, DTR check form 53-10-18-1 for alternative inspections.
The NDI method(s) necessary to accomplish the intent of this inspection is contained in the
737 Nondestructive Test Manual (D6-37239). The inspection procedures are contained in Part
6, Subject 53-10-99.
SUBTASK 53-05-02-410-044
(3) Close this access panel:
Number Name/Location
117A Electronic Equipment Access Door
END OF TASK
TASK 53-05-02-211-809
30. INTERNAL - DETAILED: NOSE WHEEL WELL SIDE AND TOP PANELS
NOTE: This procedure is a scheduled maintenance task.
A. References
Reference Title
53-14-01-020-801 Nose Wheel Well Access Panels - Removal (P/B 401)
53-14-01-420-801 Nose Wheel Well Access Panels - Installation (P/B 401)
B. Location Zones
Zone Area
113 Area Above and Outboard of Nose Landing Gear Wheel Well - Left
114 Area Above and Outboard of Nose Landing Gear Wheel Well - Right
115 Nose Landing Gear Wheel Well - Left
116 Nose Landing Gear Wheel Well - Right
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
53-05-02
Page 213
D633A101-ILF Oct 15/2018
ECCN 9E991 BOEING PROPRIETARY - Copyright © Unpublished Work - See title page for details
EFFECTIVITY
ILF ALL
To Next Page
Loading...
