(b) If you find a fault code, then do these steps:
1) Go to the Fault Code Index in the applicable chapter of the FIM and find the fault
code.
NOTE: The first two digits of the fault code is the FIM chapter.
2) Find the task number on the same line as the fault code.
3) Go to the task in the FIM and do the steps in the task.
(c) If you find a description of the fault, then do these steps:
1) Go to the Observed Fault List at the beginning of the FIM and find the best
description.
2) Find the task number on the same line as the fault description
3) Go to the task in the FIM and do the steps in the task.
SUBTASK 30-00-00-440-008
(2) If the fault was repaired, remove the INOP placard from the affected light.
END OF TASK
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
30-00-00
Page 932
D633A101-ILF Jun 15/2019
ECCN 9E991 BOEING PROPRIETARY - Copyright © Unpublished Work - See title page for details
EFFECTIVITY
ILF ALL
To Next Page
Loading...
