TASK 53-52-00-000-802
4. Nose Radome Protective Boot Removal
A. References
Reference Title
53-52-00-370-801 Nose Radome - Cleaning/Painting (P/B 701)
B. Location Zones
Zone Area
111 Radome
C. Procedure
SUBTASK 53-52-00-000-002
CAUTION
USE CARE WHEN USING KNIFE TO PREVENT DAMAGE TO LAMINATIONS
OF RADOME.
(1) Lightly cut the radome boot into 4 pieces with a knife or a razor blade.
SUBTASK 53-52-00-000-003
(2) Remove the 4 radome boot pieces:
(a) Lift an edge slowly.
(b) Remove the radome boot piece slowly at an angle of 90° to 180°.
NOTE: When removing the radome boot pieces, the speed and angle may affect how
much adhesive residue is left and how much paint is removed from the nose
radome. Remove the radome boot pieces slowly to avoid adhesive residue and
removed paint.
(c) Do the procedure again until all 4 pieces are removed.
SUBTASK 53-52-00-000-004
(3) Remove the adhesive residue.
SUBTASK 53-52-00-100-004
(4) Clean the radome boot area.
SUBTASK 53-52-00-300-001
(5) Repair areas of removed paint:
(a) Do this task: Nose Radome - Cleaning/Painting, TASK 53-52-00-370-801.
END OF TASK
TASK 53-52-00-400-802
5. Nose Radome Protective Boot Installation
A. References
Reference Title
51-21-99-300-801 Decorative Exterior Paint System Application (P/B 701)
51-21-99-370-801 Basecoat/Clearcoat Paint System - Repair (P/B 701)
B. Tools/Equipment
Reference Description
STD-821
Squeegee - Plastic
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
53-52-00
Page 205
D633A101-ILF Oct 15/2017
ECCN 9E991 BOEING PROPRIETARY - Copyright © Unpublished Work - See title page for details
EFFECTIVITY
ILF ALL
To Next Page
Loading...
