(g) Regrease all grease fittings in the treatment area.
(h) In cases where the wheel well is cleaned with steam or high pressure water and
detergent, reapplication of corrosion inhibiting compound is recommended.
SUBTASK 53-11-37-610-036
(5) Frequency of Application
(a) Periodic inspection is required to areas identified as susceptible to corrosion and should
be consistent to the schedules specified in the Maintenance Planning Document.
Operators must be aware of reported problems and areas of occurrences.
(b) Periodic application of corrosion inhibiting compound, G00009 is necessary to areas
identified and should be consistent to the schedule specified in the Maintenance Planning
Document.
SUBTASK 53-11-37-610-037
(6) Improved Corrosion Protection
(a) A layer of corrosion preventive compound, C00755 was added on the corrosion inhibiting
compound, G00009 in some areas.
END OF TASK
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
53-11-37
Page 230
D633A101-ILF Oct 15/2015
ECCN 9E991 BOEING PROPRIETARY - Copyright © Unpublished Work - See title page for details
EFFECTIVITY
ILF ALL
To Next Page
Loading...
