EasyManua.ls Logo

Boeing 737-600 - Subtask 53-05-02-211-007; Task 53-05-02-211-808 - INTERNAL - DETAILED: FWD ENTRY DOOR AFT EDGE FRAME STOPS; Subtask 53-05-02-211-008; Task 53-05-02-250-820 - INTERNAL - SPECIAL DETAILED: FWD ENTRY DOOR CUTOUT

Boeing 737-600
2300 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A. Location Zones
Zone Area
221 Passenger Compartment - Aft of Control Compartment to Forward Entry Door - Left
B. Inspection
SUBTASK 53-05-02-211-007
NOTE: Open FWD Entry Door. Removal of interior panel is required to perform the inspection.
(1) Do a Detailed inspection of the S-15 and S-16 tension straps at the fastener holes on either
side of Sta 351.2 frame.
See Doc. D626A001-DTR, DTR check form 53-10-14-10 for alternative inspections.
END OF TASK
TASK 53-05-02-211-808
25. INTERNAL - DETAILED: FWD ENTRY DOOR AFT EDGE FRAME STOPS
NOTE: This procedure is a scheduled maintenance task.
A. Location Zones
Zone Area
221 Passenger Compartment - Aft of Control Compartment to Forward Entry Door - Left
B. Inspection
NOTE: Open FWD Entry Door. Removal of interior panel is required to perform the inspection.
SUBTASK 53-05-02-211-008
(1) Do a Detailed inspection of the Aft frame stops at the inner flange holes near Sta 348.2 from
stringer S-7 to S-14.
See Doc. D626A001-DTR, DTR check form 53-10-14-11 for alternative inspections.
END OF TASK
TASK 53-05-02-250-820
26. INTERNAL - SPECIAL DETAILED: FWD ENTRY DOOR CUTOUT
NOTE: This procedure is a scheduled maintenance task.
A. Location Zones
Zone Area
117 Electrical and Electronics Compartment - Left
221 Passenger Compartment - Aft of Control Compartment to Forward Entry Door - Left
B. Inspection
NOTE: Removal of scuff plate is required to perform the inspection.
SUBTASK 53-05-02-250-020
(1) Do a High Frequency Eddy Current inspection of the skin around the fastener holes and along
the edge of the cutout hidden by the scuff plates from STA 303 to STA 350.
See Doc. D626A001-DTR, DTR check form 53-10-14-12 for alternative inspections.
The NDI method(s) necessary to accomplish the intent of this inspection is contained in the
737 Nondestructive Test Manual (D6-37239). The inspection procedures are contained in Part
6, Subject 53-30-43.
END OF TASK
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
53-05-02
Page 211
D633A101-ILF Jun 15/2019
ECCN 9E991 BOEING PROPRIETARY - Copyright © Unpublished Work - See title page for details
EFFECTIVITY
ILF ALL

Table of Contents

Related product manuals