See Doc D626A001-DTR, DTR check form 53-60-05-2 for alternative inspections.
END OF TASK
TASK 53-05-02-211-841
124. EXTERNAL - DETAILED: WINDOW BELT STA 727 TO STA 888
NOTE: This procedure is a scheduled maintenance task.
A. Location Zones
Zone Area
241 Aft Passenger Compartment - Station 663.75 to Aft Pressure Bulkhead - Left
242 Aft Passenger Compartment - Station 663.75 to Aft Pressure Bulkhead - Right
B. Inspection
SUBTASK 53-05-02-211-041
(1) Do a Detailed inspection of the window frames around each window from STA 727 to STA 888.
See Doc D626A001-DTR, DTR check form 53-60-05-2 for alternative inspections.
END OF TASK
TASK 53-05-02-250-888
125. INTERNAL - SPECIAL DETAILED: AFT CARGO DOOR SURROUND STRUCTURE
NOTE: This procedure is a scheduled maintenance task.
A. Location Zones
Zone Area
142 Aft Cargo Compartment - Right
B. Access Panels
Number Name/Location
822 Aft Cargo Door
C. Inspection
SUBTASK 53-05-02-010-096
(1) Open this access panel:
Number Name/Location
822 Aft Cargo Door
NOTE: Cargo Door must be open to perform the inspection.
SUBTASK 53-05-02-250-088
(2) Do a High Frequency Eddy Current inspection of the frame inner chord between the web and
failsafe strap from stringers S-18R to S-26R.
See Doc D626A001-DTR, DTR check form 53-60-08-1 for alternative inspections.
The NDI method(s) necessary to accomplish the intent of this inspection is contained in the
737 Nondestructive Test Manual (D6-37239). The inspection procedures are contained in Part
6, Subject 53-10-88.
SUBTASK 53-05-02-410-094
(3) Close this access panel:
Number Name/Location
822 Aft Cargo Door
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
53-05-02
Page 280
D633A101-ILF Oct 15/2019
ECCN 9E991 BOEING PROPRIETARY - Copyright © Unpublished Work - See title page for details
EFFECTIVITY
ILF ALL