TASK 24-11-00-700-804
5. IDG Push-to-Vent Valve Replacement
(Figure 203)
A. General
(1) This task removes and installs the IDG push-to-vent valve. The push-to-vent valve is on the
IDG next to the sightglass. After replacement of the valve, it is necessary to do a leak check.
B. References
Reference Title
12-13-21-600-801 IDG Servicing (Oil Fill) (P/B 301)
71-00-00-700-821-F00 Dry Motor the Engine (P/B 201)
71-11-02-010-801-F00 Open the Fan Cowl Panels (P/B 201)
71-11-02-410-801-F00 Close the Fan Cowl Panels (P/B 201)
C. Tools/Equipment
NOTE: When more than one tool part number is listed under the same "Reference" number, the
tools shown are alternates to each other within the same airplane series. Tool part numbers
that are replaced or non-procurable are preceded by "Opt:", which stands for Optional.
Reference Description
COM-1537 Cart - Servicing, Engine Oil
737-600, -700, -800
Part #: 7011 Supplier: K6057
Part #: BOB02 Supplier: D2029
Part #: BOB05 Supplier: D2029
Part #: MODEL 150 Supplier: 94861
Part #: PF53361-2PWS Supplier: 94861
Part #: PF53361-8PWS Supplier: 94861
Part #: PF53481-3P Supplier: 94861
Part #: PF53481-5PWS Supplier: 94861
Part #: PF53481-8PWS Supplier: 94861
Part #: PF55451-2WS Supplier: 94861
Part #: PF55451-7WS Supplier: 94861
Part #: WF150-1 Supplier: 94861
Opt Part #: 150-3 Supplier: 94861
Opt Part #: UZ/7/1826 Supplier: K6057
D. Consumable Materials
Reference Description Specification
D00068 Oil - Aircraft Turbine Engine, Synthetic Base MIL-PRF-23699 Class
STD (Standard)
D00071 Oil - Aircraft Turbine Engine, Synthetic Base MIL-PRF-7808 Grade 3
G01048 Lockwire - MS20995C32, Corrosion Resistant
Steel - 0.032 Inch (0.8128 mm) Diameter
NASM20995
E. Expendables/Parts
AMM Item Description AIPC Reference AIPC Effectivity
21 Vent valve 24-11-11-50-223 ILF ALL
22 0-ring 24-11-11-50-224 ILF ALL
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
24-11-00
Page 208
D633A101-ILF Jun 15/2019
ECCN 9E991 BOEING PROPRIETARY - Copyright © Unpublished Work - See title page for details
EFFECTIVITY
ILF ALL