SUBTASK 80-11-01-610-004-F00
CAUTION
MAKE SURE THAT YOU FILL THE STARTER WITH OIL BEFORE
INSTALLATION. IF YOU DO NOT OBEY THIS INSTRUCTION, DAMAGE TO
THE STARTER CAN OCCUR.
(3) Do this task: Starter Servicing (Oil Fill), TASK 80-11-01-610-801-F00.
SUBTASK 80-11-01-420-002-F00
(4) Install the seal [10] on the bottom flange of the starter duct [1].
NOTE: The seal [10] has an oval shape and will "snap" into its position.
SUBTASK 80-11-01-420-003-F00
WARNING
DO NOT LET OIL STAY ON YOUR SKIN. YOU CAN ABSORB POISONOUS
MATERIALS FROM THE OIL THROUGH YOUR SKIN.
(5) Install the packing [3] and the packing [4] on the starter [9] as follows:
(a) Lubricate the packing [3] and the packing [4] with oil, D00599 [CP2442].
(b) Install the packing [3] on the starter flange.
(c) Install the packing [4] on the starter shaft.
SUBTASK 80-11-01-420-004-F00
(6) Install the starter [9] on the AGB [6] as follows:
NOTE: The dowel pins of the QAD adapter and the pin holes of the starter will only align one
way.
(a) Align the starter shaft with the splines of the AGB [6].
(b) Align the dowel pins on the QAD adapter [5] with the pin holes in the starter [9].
(c) Put the starter shaft into the AGB [6] until the starter flange engages the QAD adapter [5].
NOTE: You can lightly push the starter duct up to engage the duct flanges.
(d) Install the clamp [7] to attach the starter [9] to the QAD adapter [5] as follows:
NOTE: There are two types of starter clamps used in the fleet. One type is a V-band
clamp which is a sheet metal design and uses spot weld connections. The
second type, released by CFM56–7B SB80–0016, has fully machined
components.
1) Carefully examine the weld joints and adjacent metal of the clamp [7] for cracks.
a) If you find cracks, replace the clamp [7].
2) Install the clamp [7] with its fastener at the bottom.
ILF ALL PRE SB 737-CFM56-7B-80-0016
CAUTION
DO NOT TIGHTEN THE NUT TO MORE THAN THE MAXIMUM TORQUE.
DAMAGE TO THE PARTS CAN OCCUR.
(e) Tighten the nut on the clamp [7] to 49-55 pound-inches (5.5-6.2 Newton-meters).
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
CFM56 ENGINES (CFM56-7)
80-11-01
Page 407
D633A101-ILF Oct 15/2018
ECCN 9E991 BOEING PROPRIETARY - Copyright © Unpublished Work - See title page for details
EFFECTIVITY
ILF ALL
To Next Page
Loading...
