EasyManua.ls Logo

Boeing 737-600 - Subtask 47-00-00-040-005; Subtask 47-00-00-790-012; Subtask 47-00-00-010-011; Subtask 47-00-00-720-016

Boeing 737-600
2300 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
(Continued)
Reference Description
SPL-11507 Sense Line - Use with Oxygen Analyzer Model 111B
737-600, -700, -800
Part #: H24004-124-5 Supplier: 11362
D. Location Zones
Zone Area
131 Center Section Wing Box, Body Station 540.00 to Body Station 663.75 - Left
133 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station 727.00 - Left
134 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station 727.00 - Right
211 Flight Compartment - Left
212 Flight Compartment - Right
E. Access Panels
Number Name/Location
192BL ECS Ram Air Inlet Mixing Duct Panel - Forward
192CL ECS Access Door
192DR ECS High Pressure Access Door
F. Prepare for the Functional Test of the Nitrogen Generation System
SUBTASK 47-00-00-040-005
(1) Do this task: Ground Operation of the Nitrogen Generation System, TASK 47-00-00-800-801.
SUBTASK 47-00-00-790-012
(2) Do a fuel leak check for the NEADS line (TASK 47-21-00-700-802).
SUBTASK 47-00-00-010-011
(3) Open this access panel:
Number Name/Location
192CL ECS Access Door
G. Prepare the Oxygen Analyzer for the Test (If Used)
NOTE: When you do the nitrogen-enriched air (NEA) purity check, there is the option to use the
oxygen concentration shown on the BDU or the oxygen concentration shown by the oxygen
analyzer, COM-7456.
SUBTASK 47-00-00-720-016
(1) Read and obey the procedures supplied with the oxygen analyzer, COM-7456, and sense line,
SPL-11507.
SUBTASK 47-00-00-720-017
(2) Make sure the oxygen analyzer, COM-7456, is calibrated and the batteries are charged.
SUBTASK 47-00-00-720-018
(3) Connect the oxygen analyzer, COM-7456, and sense line, SPL-11507.
(a) Connect the sense line, SPL-11507, to the SAMPLE IN port.
(b) Make sure that the SAMPLE OUT exhaust port and vent are not blocked.
NOTE: You will get an incorrect oxygen value if the exhaust port or the vent is blocked.
(c) Set up a platform adjacent to the ECS pack compartment.
(d) Make sure that the platform is not below the opening for the ECS pack compartment.
(e) Attach the oxygen analyzer, COM-7456, to the platform.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
47-00-00
Page 502
D633A101-ILF Oct 15/2019
ECCN 9E991 BOEING PROPRIETARY - Copyright © Unpublished Work - See title page for details
EFFECTIVITY
ILF 402, 452, 509, 510, 523, 525-528, 568, 569, 576, 577, 581, 583, 585, 588-590,
592-599, 601-603, 606, 607, 610-615, 620, 625-627, 691-699, 833-835, 838, 971, 980-999;
ILF 101, 151, 156-199, 301, 304, 308, 310, 314, 315, 317-319, 323, 331-399, 401, 405,
406, 409, 410, 412, 416, 424, 425, 427-429, 451, 501-504, 507, 508, 512-514, 516, 518,
524, 531-533, 535-537, 541, 542, 552-556, 560-562, 567, 571-575, 671, 672, 686, 703,
707-710, 803-813, 821, 822, 831, 832, 836, 837, 841, 842, 851, 852, 854-858, 861-863,
871-874, 947, 948, 968-970, 972, 973 POST SB 737-47-1003

Table of Contents

Related product manuals