D-Link xStack DGS-3610 Series - Showing DHCP Snooping Configuration; Showing DHCP Snooping; Showing DHCP Snooping Database Information

DGS-3610 Series Configuration Guide Chapter 14 DHCP Snooping Configuration
14-9
Command
Description
DGS-3610# clear ip dhcp snooping binding
Clear information from the current database
The following example shows how to clear information from the current database manually:
DGS-3610# clear ip dhcp snooping binding
14.3 Showing DHCP Snooping
Configuration
14.3.1 Showing DHCP snooping
To show the contents of ip dhcp snooping, perform the following steps:
Command
Description
DGS-3610# show ip dhcp snooping
Show configuration information of DHCP
snooping.
For example:
DGS-3610# show ip dhcp snooping
Switch DHCP snooping status : ENABLE
DHCP snooping Verification of hwaddr status : ENABLE
DHCP snooping database wirte-delay time : 3600
Interface Trusted
------------------------ -------
GigabitEthernet 0/1 YES
14.3.2 Showing DHCP Snooping Database
Information
To show information in the ip dhcp snooping database, perform the following steps:
Command
Description
DGS-3610# show ip dhcp snooping binding
View the static user information in the DHCP
Snooping binding database
For example:
DGS-3610# show ip dhcp snooping binding
MacAddress IpAddress Lease(sec) Type VLAN Interface
------------------ --------------- ---------- -------------
00d0.f801.0101 192.168.4.243 - static 1 GigabitEthernet 0/9