D-Link xStack DGS-3610 Series

DGS-3610 Series Configuration Guide Chapter 29 BGP Configuration
29-3
TCP MD5 Authentication Used
Off
Timer
Keepalive Time
60seconds
Holdtime
180seconds
ConnectRetry Time
120seconds
AdvInterval(IBGP)
15seconds
AdvInterval(EBGP)
30seconds
Path Attribute
MED
0
LOCAL_PREF
100
Route Aggregate
Off
Routing
Dampening
Status
Off
Suppress Limit
2000
Half-life-time
15minutes
Reuse Limit
750
Max-suppress-time
4*half-life-time
Route Reflector
Status
Off
Cluster ID
Undefined
Route among reflection
clients
Enabled
AS Confederation
Off
Soft Reset
Off
Management
Distance
External-distance
20
Internal-distance
200
Local-distance
200
29.3 Inject Route Information to BGP
Protocol
The route information of the GBP is empty when it operates at just. Two measures can be
taken to inject the route information to the BGP:
Manually inject the route information to the BGP by the Network commands.
Inject the route information to the BGP from the IGP by the interaction with the IGP protocol.
The BGP will issue the injected route information to its neighbors. This section will describe
the manual injection of the route information. For the injection of the route information from
the IGP, refer to the Configuration of BGP and IGP Interaction in related section.