EasyManuals Logo

D-Link xStack DGS-3610 Series User Manual

D-Link xStack DGS-3610 Series
703 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #652 background imageLoading...
Page #652 background image
Chapter 46 VRRP Configuration DGS-3610 Series Configuration Guide
46-10
DGS-3610# show vrrp interface GigabitEthernet 0/0
GigabitEthernet 0/0 - Group 1
State is Backup
Virtual IP address is 192.168.201.1 configured
Virtual MAC address is 0000.5e00.0101
Advertisement interval is 3 sec
Preemption is enabled
min delay is 0 sec
Priority is 100
Master Router is 192.168.201.213 , pritority is 120
Master Advertisement interval is 3 sec
Master Down interval is 9 sec
GigabitEthernet 0/0 - Group 2
State is Master
Virtual IP address is 192.168.201.2 configured
Virtual MAC address is 0000.5e00.0102
Advertisement interval is 3 sec
Preemption is enabled
min delay is 0 sec
Priority is 120
Master Router is 192.168.201.217 (local), priority is 120
Master Advertisement interval is 3 sec
Master Down interval is 9 sec
DGS-3610#
The displayed information above include the specified Ethernet name, VRRP backup group
number configured on the interface, status, priority, preemption mode, VRRP advertisement
interval, virtual IP address, virtual MAC address, Master router IP address, Master router
priority, Master router advertisement interval, Master router failure judgment interval, current
interface monitored by the VRRP backup group and corresponding priority change scale.
46.4.2 debug vrrp
DGS-3610 series provide VRRP status debugging information for local routing devices
through the following debug vrrp commands.
Command
Purpose
DGS-3610# debug vrrp error
Turn on VRRP error prompt debugging switch
DGS-3610# no debug vrrp error
Turn off VRRP error prompt debugging switch
DGS-3610# debug vrrp events
Turn on the VRRP event debugging switch
DGS-3610# no debug vrrp events
Turn off the VRRP event debugging switch
DGS-3610# debug vrrp packets
Turn on the VRRP packet debugging switch
DGS-3610# no debug vrrp
packets
Turning off the VRRP packet debugging switch
DGS-3610# debug vrrp state
Turn on the VRRP state debugging switch
DGS-3610# no debug vrrp state
Turn off the VRRP status debugging switch
DGS-3610# debug vrrp
Enable the IP debug switch
DGS-3610# no debug vrrp
Turn off the VRRP debugging switch

Table of Contents

Other manuals for D-Link xStack DGS-3610 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link xStack DGS-3610 Series and is the answer not in the manual?

D-Link xStack DGS-3610 Series Specifications

General IconGeneral
BrandD-Link
ModelxStack DGS-3610 Series
CategorySwitch
LanguageEnglish

Related product manuals