D-Link xStack DGS-3610 Series User Manual

DGS-3610 Series Configuration Guide Chapter 25 SNMP Configuration
25-7
25.2.2 Configuring MIB Views and Groups
You can decide whether a MIB object allowed by a SNMP view or not through the
access-control model based on SNMP view, only the MIB objects allowed by the SNMP view
can be accessed. For accessing control, we always specify a user to associate with a SNMP
group, the associate the SNMP group with a SNMP view. Any user in the same SNMP group
has the same access authority.
 Including view and excluding view can be set.
 Read only view and writable view can be set for a group of users.
 For the SNMPv3 users, it is possible to specify the safety level and whether the
authentication or encryption is necessary.
To configure the MIB views and groups, run the following commands in the global
configuration mode:
Command
Function
DGS-3610(config)# snmp-server view
view-name oid-tree {include | exclude}
Create an MIB view to including or excluding
associated MIB objects.
DGS-3610(config)# snmp-server group
groupname {v1 | v2c |v3 {auth | noauth | priv}}
[read readview] [write writeview] [access
{num |
name}]
Create a group and associate it with the view.
You can delete a view by using the no snmp-server view view-name command, or delete a
sub-tree from the view by using the no snmp-server view view-name oid-tree command.
You can also delete a group by using the no snmp-server group groupname command.
25.2.3 Configuring SNMP Users
You can implement the security management through the security model user based, first
the user information should be configured for the management user based . Only valid users
of NMS can communicate with the SNMP agent.
For the SNMPv3 users, specify the security level, authentication algorithm (MD5 or SHA),
authentication password, encryption algorithm (only DES now) and encryption password.
To configure the SNMP user, run the following commands in the global configuration mode:
Command
Function
DGS-3610(config)# snmp-server user
username roupname {v1 | v2 | v3 [encrypted]
[auth { md5|sha } auth-password ] [priv des56
priv-password] }
Set the information for the user.

D-Link xStack DGS-3610 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3610 Series
Category	Switch
Language	English