D-Link xStack DGS-3610 Series

Chapter 35 IP Multicast Routing Configuration DGS-3610 Series Configuration Guide
35-38
!
route rip
network 192.168.21.0
network 192.166.1.0
network 192.166.100.0
version 2
!
ip pim-sm bsr-candidate Loopback0 30 201
ip pim-sm rp-candidate Loopback0
!
ROUTER_B:
!
ip multicast-routing
!
interface Ethernet0/1
ip address 192.168.200.144 255.255.255.0
ip pim-sm
ip pim-sm dr-priority 200
!
interface Serial0/0
ip address 192.168.21.144 255.255.255.0
ip pim-sm
!
Note
When PIM-SM is enabled, IGMP is automatically enabled in each
interface respectively, without the need manual configuration.
35.7.3 BSR Configuration Examples
Following example to show the BSR configuration of two devices:
ROUTER_A:
!
ip multicast-routing
!
interface Loopback0
ip address 192.166.100.42 255.255.255.0
ip pim-sm
!
interface Ethernet1/1
ip address 192.166.1.142 255.255.255.0
ip pim-sm
!
interface serial2/0
ip address 192.168.21.142 255.255.255.0
physical-layer speed 12800
ip pim-sm