D-Link xStack DGS-3610 Series

DGS-3610 Series Configuration Guide Chapter 15 IGMP Snooping Configuration
15-9
Figure 15-6
Router interface
Equipment requirement: The switch supports IGMP Snooping.
Required setup:
1. Enable IGMP Snooping function.
2. Set upper link as router interface.
Characteristics:
1. Simple configuration;
2. Effectively reducing broadcast storm, improving network bandwidth utilization rate.
15.2 Configuring IGMP Snooping
We will describe how to configure IGMP snooping in the following chapters
 IGMP Snooping Default
 Configuring IGMP Profiles
 Configuring Router Interface
 Configuring Range of Multicast Frame Forwarding by Router Interface
 Configuring IVGL Mode
 Configuring SVGL Mode
 Configuring Coexistence Mode of IVGL and SVGL
 Configuring DISABLE Mode
 Configuring Maximum Response Time of Query Message
 Configuring Source Port Check
 Configuring Source IP Check
 Configuring IGMP Static members
 Configuration IGMP Filtering