EasyManuals Logo

D-Link xStack DGS-3610 Series User Manual

D-Link xStack DGS-3610 Series
703 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #418 background imageLoading...
Page #418 background image
Chapter 32 IPv6 Configuration DGS-3610 Series Configuration Guide
32-18
DGS-3610(config)# interface vlan 1
DGS-3610(config-if)# ipv6 nd dad attempts 3
DGS-3610(config-if)# end
DGS-3610# show ipv6 interface vlan 1
Interface vlan 1 is Up, ifindex: 2001
address(es):
Mac Address: 00:d0:f8:00:00:01
INET6: fe80::2d0:f8ff:fe00:1 , subnet is fe80::/64
INET6: fec0:0:0:1::1 , subnet is fec0:0:0:1::/64
Joined group address(es):
ff01:1::1
ff02:1::1
ff02:1::2
ff02:1::1:ff00:1
MTU is 1500 bytes
ICMP error messages limited to one every 10 milliseconds
ICMP redirects are enabled
ND DAD is enabled, number of DAD attempts: 3
ND reachable time is 30000 milliseconds
ND advertised reachable time is 0 milliseconds
ND retransmit interval is 1000 milliseconds
ND advertised retransmit interval is 0 milliseconds
ND router advertisements are sent every 200 seconds<240--160>
ND router advertisements live for 1800 seconds
32.2.5 Configuring Other Interface
Parameters of Routers
The configuration parameters of the IPv6 in the interface of the devices is mainly comprised
of 2 parts, one is used to control the behavior of the router itself, the other one is used to
control the contents of the router advertisement (RA) sent by the router, to determine what
action should be taken by the host when it receives this router advertisement (RA).
The following will introduce these commands one by one:
Command
Meaning
configure terminal
Enter the global configuration mode.
interface interface-id
Enter the interface configuration mode.
ipv6 enable
Enable the IPv6 function.
ipv6 nd ns-interval
milliseconds
(Optional) Define the retransmission interval of the
neighbor solicitation message.
ipv6 nd reachable-time
milliseconds
(Optional) Define the time when the neighbor is
considered to be reachable.
ipv6 nd prefix
ipv6-prefix/prefix-length |
default [[valid-lifetime
(Optional) Set the address prefix to be advertised in
the router advertisement (RA) message.

Table of Contents

Other manuals for D-Link xStack DGS-3610 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link xStack DGS-3610 Series and is the answer not in the manual?

D-Link xStack DGS-3610 Series Specifications

General IconGeneral
BrandD-Link
ModelxStack DGS-3610 Series
CategorySwitch
LanguageEnglish

Related product manuals