D-Link xStack DGS-3610 Series

DGS-3610 Series Configuration Guide Chapter 16 PIM Snooping Configuration
16-3
16.4.1 Enable PIM Snooping Globally
To enable the PIM snooping globally, execute the following tasks:
Command
Function
DGS-3610(config)# ip pim snooping
DGS-3610(config)# no ip pim snooping
Enable the PIM snooping.
Disable the PIM snooping.
DGS-3610(config)# end
Exit the configuration mode.
DGS-3610# show ip pim snooping
Check the configuration.
The following example will show how to enable and check the configuration globally.
DGS-3610(config)# ip pim snooping
DGS-3610(config)# end
DGS-3610# show ip pim snooping
16.4.2 Enable PIM Snooping on SVI
To enable the PIM snooping on SVI, execute the following tasks:
Command
Function
DGS-3610(config)# interface vlan vlan_ID
Select the VLAN interface.
DGS-3610(config)# ip pim snooping
DGS-3610(config)# no ip pim snooping
Enable the PIM snooping.
Disable the PIM snooping.
DGS-3610(config)# end
Exit the configuration mode.
DGS-3610# show ip pim snooping
Check the configuration.
The following example will show how to enable and check the configuration globally.
DGS-3610(config)# ip pim snooping
DGS-3610(config)# end
DGS-3610# show ip pim snooping