D-Link xStack DGS-3610 Series User Manual

DGS-3610 Series Configuration Guide Chapter 37 Configuration of 802.1X
37-25
Command
Function
show running-config
Show the configuration.
Caution
If the list of the host is empty, the port allows any host authentication.
37.2.17 Authorization
To make it easier for operators, our products can provide services of different qualities for
different types of services, for example, offering different maximum bandwidths. Such
information is all stored on the Radius Server, and the administrator does not need to
configure every device.
Since the Radius has no standard attribute to represent the maximum data rate, we can only
transfer the authorization information through the manufacturer customized attributes.
The general format of the definition is as follows:
Figure 37-6
For the maximum data rate, you need to fill in the following values:
Figure 37-7
Hex value of the maximum data rate
The unit of the maximum data rate is kbps.
For users with the maximum data rate of 10M, you need to fill in the following values:

D-Link xStack DGS-3610 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3610 Series
Category	Switch
Language	English