To Next Page

To Previous Page

DGS-3610 Series Configuration Guide Chapter 37 Configuration of 802.1X

37-13

37.7.5 None Authorization

To enable no authorization for the user, you need to execute the aaa authorization

command with keyword none.

Command

Function

configure terminal

Enter the global configuration mode.

aaa new-model

Turn on the AAA switch.

aaa authorization network

{default | list-name} none

Define the none authorization.

37.7.6 Example of Configuring Network

Authorization

The example below illustrates how to perform network authorization.

DGS-3610# configure terminal

DGS-3610(config)# aaa new-model

DGS-3610(config)# radius-server host 192.168.217.64

DGS-3610(config)# username DGS-3610 privilege 6

DGS-3610(config)# aaa authorization network test group radius local none

DGS-3610(config)# end

DGS-3610# show running-config

aaa new-model

aaa authorization network test group radius local none

username DGS-3610 password 0 starnet

username DGS-3610 privilege 6

radius-server host 192.168.217.64

37.8 Configuring Accounting

The AAA accounting function enables you to trace the services and network resources used

by the user. After the accounting function is enabled, the network access server or router

sends the user's network accesses to the Radius security server by means of attribute pair.

You may use some analysis software to analyze these data to implement the billing, audition

and tracing function for the user's activities.

37.8.1 Accounting Types

Our product currently supports the following accounting types:

 Network Accounting

D-Link xStack DGS-3610 Series User Manual

Other manuals for D-Link xStack DGS-3610 Series