D-Link xStack DGS-3610 Series User Manual

Chapter 37 Configuration of 802.1X DGS-3610 Series Configuration Guide
37-14
37.8.2 Network Accounting
The network accounting provides the accounting information about user session, including
the packet number, bytes, IP address and username.
Note
The format of Radius accounting information varies with the Radius
security server. The contents of the account records may also vary with
our product version.
37.8.3 Preparations for Accounting
The following tasks must be completed before the AAA accounting is configured:
 Enable the AAA security server. For details, see AAA Overview.
 Define the security protocol parameters. Our product supports the Radius security
protocol. For details of the RADIUS, see Configuring RADIUS.
37.8.4 Configuring Accounting
To configure the AAA accounting function, execute the following command in the global
configuration mode:
Command
Function
configure terminal
Enter the global configuration mode.
aaa new-model
Turn on the AAA switch.
radius-server host ip-address [auth-port
port]
[acct-port port]
Configure the RADIUS server
end
Return to the privileged mode.
show radius server
Show the RADIUS server.
configure terminal
Enter the global configuration mode.
aaa accounting network acct start-stop
group radius
Configure the AAA network accounting function.
Note
The keyword start-stop is used for the network access server to send the
accounting information at the start and end of the network service to the
security server.
37.8.5 Monitoring AAA users
To view the information of the current login users, run the following commands in the
privileged user mode:

D-Link xStack DGS-3610 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3610 Series
Category	Switch
Language	English