D-Link xStack DGS-3610 Series User Manual

Chapter 47 RLDP Configuration DGS-3610 Series Configuration Guide
47-8
Note
The errdisable recover command can be used in the global configuration
mode to restart, instantly or at fixed time, the RLDP detection of the port
that is set as the violation port by RLP.
47.3 Viewing RLDP Information
The following RLDP-related information can be viewed:
 View the RLDP status of all ports
 View the RLDP status of the specified port
47.3.1 Viewing the RLDP Status of All Ports
In the privileged mode, run the following commands to view the RLDP global configuration
and the port detection information with RLDP detection configured:
Command
Function
DGS-3610# show rldp
View the RLDP global configuration and the port
detection information with RLDP detection
configured
In the example below, the show rldp command is used to view the detection information of
all RLDP ports:
DGS-3610# show rldp
rldp state : enable
rldp hello interval : 2
rldp max hello : 3
rldp local bridge : 00d0.f8a6.0134
------------------------------------------------
interface GigabitEthernet 0/1
port state:normal
neighbor bridge : 00d0.f800.41b0
neighbor port : GigabitEthernet 0/2
unidirection detect information:
action : shutdown svi
state : normal
interface GigabitEthernet 0/24
port state:error
neighbor bridge : 0000.0000.0000
neighbor port :
bidirection detect information :
action : warnning
state : error

D-Link xStack DGS-3610 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3610 Series
Category	Switch
Language	English