D-Link xStack DGS-3610 Series - Example of Configuring Accounting

DGS-3610 Series Configuration Guide Chapter 37 Configuration of 802.1X
37-15
Command
Function
show aaa user { id | all }
View the information of the current AAA user.
37.8.6 Example of Configuring Accounting
Below is an example to use the Radius for accounting:
DGS-3610# config
DGS-3610(config)# aaa new-model
DGS-3610(config)# radius-server host 192.168.217.64
DGS-3610(config)# aaa accounting network acct start-stop group radius
DGS-3610(config)# end
DGS-3610# show running-config
!
aaa new-model
!
aaa accounting network acct start-stop group radius
!
username DGS-3610 password 0 starnet
username DGS-3610 privilege 6
!
radius-server host 192.168.217.64
Note
For the information about how to configure the accounting method list
command, see the related command reference manual.