D-Link xStack DGS-3610 Series - Viewing the Statistics of Received Packets of a Specific Type

DGS-3610 Series Configuration Guide Chapter 40 CPU Protection Configuration
40-5
Type Pps Total Drop
------------ --------- --------- ---------
arp 200 200 15
bpdu 200 8 0
dhcp 200 0 0
gvrp 200 0 0
ipv6-mc 200 0 0
dvmrp 200 0 0
igmp 200 0 0
ospf 200 0 0
pim 200 0 0
rip 200 0 0
vrrp 200 0 0
unknow-ipmc 200 0 0
err-ttl 20 3 0
40.3.3 Viewing the Statistics of Received
Packets of a Specific Type
In the privileged mode, show the priority and bandwidth of each type of packet with the
following commands:
Command
Function
DGS-3610# show cpu-protect type arp |
bpdu | dhcp | ipv6mc | igmp | rip | ospf |
vrrp | pim | ttl1 | unknown-ipmc | dvmrp
Show the statistics of the packets received of a
each type
The following example shows the statistics of the arp packets through the show cpu-protec
type arp command:
DGS-3610(config)# show cpu-protect type arp
Slot Type Pps Total Drop
--------- ------------ --------- --------- ---------
MainBoard arp 200 15 0
Slot-2 arp 200 15 0
Caution
1. Packet speed restriction is measured by the software, so a slight
deviation of the number of packets is normal.
2. The actual information printed may be different from the example.