D-Link xStack DGS-3610 Series User Manual

Chapter 27 RIP Routing Protocol Configuration DGS-3610 Series Configuration Guide
27-10
Configuration of Device B:
#Configuring Ethernet port
interface FastEthernet0/0
ip address 172.16.20.1 255.255.255.0
#Configure the WAN port
interface Serial1/0
ip address 192.168.123.2 255.255.255.0
encapsulation frame-relay
#Configuring RIP route protocol
router rip
version 2
network 172.16.0.0
network 192.168.123.0
no auto-summary
Configuration of Device C:
# Configuring Ethernet port
interface FastEthernet0/0
ip address 172.16.30.1 255.255.255.0
# Configure the WAN port
interface Serial1/0
ip address 192.168.123.3 255.255.255.0
encapsulation frame-relay
# Configuring RIP route protocol
router rip
version 2
network 172.16.0.0
network 192.168.123.0
no auto-summary
Configuration of Device D:
# Configuring Ethernet port
interface FastEthernet0/0
ip address 192.168.12.4 255.255.255.0
ip address 192.168.13.4 255.255.255.0 secondary
no ip split-horizon
# Configuring RIP route protocol
router rip
version 2
network 192.168.12.0
network 192.168.13.0

D-Link xStack DGS-3610 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3610 Series
Category	Switch
Language	English