show lldp port tx-tlv
SecureStack C2 Configuration Guide 4-17
Example
ThisexampleshowshowtodisplayLLDPporttrapinformationforallports.
C2(ro)->show lldp port trap
Trap-Enabled Ports :
MED Trap-Enabled Ports:
show lldp port tx-tlv
UsethiscommandtodisplayinformationaboutwhichoptionalTLVshavebeenconfiguredtobe
transmittedonports.PortsareconfiguredtosendoptionalTLVswiththesetlldpporttx‐tlv
command.
Syntax
showlldpporttx‐tlv[port‐string]
Parameters
Defaults
Ifport‐stringisnotspecified,TLVconfiguration informationwillbedisplayedforallports.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplaytransmitTLVinformationforthreeports.
C2(ro)->show lldp port tx-tlv ge.1.1-3
* Means TLV is supported and enabled on this port
o Means TLV is supported on this port
Means TLV is not supported on this port
Column Pro Id uses letter notation for enable: s-stp, l-lacp, g-gvrp
Ports Port Sys Sys Sys Mgmt Vlan Pro MAC PoE Link Max MED MED MED MED
Desc Name Desc Cap Addr Id Id PHY Aggr Frame Cap Pol Loc PoE
------- ---- ---- ---- --- ---- ---- ---- --- --- ---- ---- --- --- --- ---
ge.1.1 * * * * * * slg * * * * *
ge.1.2 * * * * * * slg * * *
ge.1.3 * * * * * * slg * * * * *
show lldp port location-info
Usethiscommandtodisplayconfiguredlocationinformationforoneormoreports.Portsare
configuredwithalocationvalueusingthesetlldpportlocation‐infocommand.
Syntax
show lldp port location-info [port-string]
port‐string (Optional)DisplaysinformationaboutTLVconfigurationforoneora
rangeofports.
To Next Page
Loading...
Need help?
General