Enterasys SecureStack C2

clear ip address
3-10 Basic Configuration
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtosetthesystemIPaddressto10.1.10.1withamaskof255.255.128.0and
adefaultgatewayof10.1.0.1:
C2(su)->set ip address 10.1.10.1 mask 255.255.128.0 gateway 10.1.10.1
clear ip address
UsethiscommandtoclearthesystemIPaddress.
Syntax
clear ip address
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoclearthesystemIPaddress:
C2(rw)->clear ip address
show ip protocol
UsethiscommandtodisplaythemethodusedtoacquireanetworkIPaddressforswitch
management.
Syntax
show ip protocol
Parameters
None.
Defaults
None.
Mode
Switchcommand,read‐only.