Enterasys SecureStack C2 User Manual

show sntp
12-26 Logging and Network Management
Example
ThisexampleshowshowtodisplaySNTPclientsettings:
C2(su)->show sntp
SNTP Version: 3
Current Time: TUE SEP 09 16:13:33 2003
Timezone: 'EST', offset from UTC is -4 hours and 0 minutes
Client Mode: unicast
Broadcast Count: 0
Poll Interval: 512 seconds
Poll Retry: 1
Poll Timeout: 5 seconds
SNTP Poll Requests: 1175
Last SNTP Update: TUE SEP 09 16:05:24 2003
Last SNTP Request: TUE SEP 09 16:05:24 2003
Last SNTP Status: Success
SNTP-Server Precedence Status
-------------------------------------------
10.2.8.6 2 Active
144.111.29.19 1 Active
Table 12‐6providesanexplanationofthecommandoutput.
Table 12-6 show sntp Output Details
Output What It Displays...
SNTP Version SNTP version number.
Current Time Current time on the system clock.
Timezone Time zone name and amount it is offset from UTC (Universal Time).
Client Mode Whether SNTP client is operating in unicast or broadcast mode. Set using set sntp
client command (“set sntp client” on page 12-27).
Broadcast Count Number of SNTP broadcast frames received.
Poll Interval Interval between SNTP unicast requests. Default of 512 seconds can be reset using
the set sntp poll-interval command (“set sntp poll-interval” on page 12-29).
Poll Retry Number of poll retries to a unicast SNTP server. Default of 1 can be reset using the
set sntp poll-retry command (“set sntp poll-retry” on page 12-30).
Poll Timeout Timeout for a response to a unicast SNTP request. Default of 5 seconds can be
reset using set sntp poll-timeout command (“set sntp poll-timeout” on page 12-31).
SNTP Poll Requests Total number of SNTP poll requests.
Last SNTP Update Date and time of most recent SNTP update.
Last SNTP Request Date and time of most recent SNTP request.
Last SNTP Status Whether or not broadcast reception or unicast transmission and reception was
successful.
SNTP-Server IP address(es) of SNTP server(s).
Precedence Precedence level of SNTP server in relation to its peers. Highest precedence is 1
and lowest is 10. Default of 1 can be reset using the set sntp server command (“set
sntp server” on page 12-28).
Status Whether or not the SNTP server is active.

Enterasys SecureStack C2 Specifications

General

Brand	Enterasys
Model	SecureStack C2
Category	Switch
Language	English