Enterasys SecureStack C2

ping
SecureStack C2 Configuration Guide 16-15
Parameters
Defaults
Ifdistanceisnotspecified,thedefaultvalueof1willbeapplied.
Mode
Globalconfiguration:C2(su)‐>router(Config)#
Example
ThisexampleshowshowtosetIPaddress10.1.2.3asthenexthopgatewaytodestinationaddress
10.0.0.0:
C2(su)->router(Config)#ip route 10.0.0.0 255.0.0.0 10.1.2.3
ping
UsethiscommandtotestroutingnetworkconnectivitybysendingIPpingrequests.
Syntax
ping ip-address
Parameters
Defaults
None.
Mode
PrivilegedEXEC:C2(su)‐>router#
Usage
Thiscommandisalsoavailableinswitchmode.
Examples
ThisexampleshowsoutputfromasuccessfulpingtoIPaddress182.127.63.23:
C2(su)->router#ping 182.127.63.23
182.127.63.23 is alive
ThisexampleshowsoutputfromanunsuccessfulpingtoIPaddress182.127.63.24:
C2(su)->router#ping 182.127.63.24
no answer from 182.127.63.24
prefix SpecifiesadestinationIP addressprefix.
mask Specifiesadestinationprefixmask.
dest‐addr Specifiesaforwarding(gateway)IPaddress.
distance (Optional)Specifiesanadministrativedistancemetricforthisroute.Valid
valuesare1(default)to255.Routeswithlowervaluesreceivehigher
preferenceinrouteselection.
ip‐address SpecifiestheIPaddressofthesystemtoping.