show ip pimsm interface
SecureStack C2 Configuration Guide 17-49
Mode
Anyroutermode.
Example
ThisexampleshowshowtodisplayPIMrouterinformation:
C2(su)->router> show ip pimsm componenttable
COMPONENT TABLE
Component Component Component Component
Index BSR Address BSR Expiry Time CRP Hold Time
(hh:mm:ss) (hh:mm:ss)
---------- --------------- --------------- -------------
1 192.168.30.2 00:02:10 00:00:00
Table 17‐8providesanexplanationofthecommandoutput.
show ip pimsm interface
ThiscommanddisplaysPIM‐SMstatusoftherouterinterfaces.Withthestatsparameter,this
commanddisplaysstatisticalinformationforPIM‐SMonthespecifiedinterface.
Syntax
show ip pimsm interface {vlan vlan-id | stats {vlan-id | all}}
Parameters
Defaults
None.
Mode
Anyroutermode.
Table 17-8 show ip pimsm componenettable Output Detail
Output What it displays
Component Index This field displays a number which uniquely identifies the component.
Component BSR
Address
This field displays the IP address of the bootstrap router (BSR) for the local PIM
region.
Component BSR
Expiry Time
This field displays the minimum time remaining before the BSR in the local domain
will be declared down.
Component CRP
Hold Time
This field displays the hold time of the component when it is a candidate rendezvous
point.
vlanvlan‐id DisplayPIM‐SMinformationforthespecifiedIPinterfaceenabledfor
PIM.
stats DisplayPIM‐SMinterfacestatistics.
vlan‐id|all DisplaystatisticsforaspecificVLANorallVLANs.
To Next Page
Loading...
Need help?
General