Enterasys SecureStack C2

show port protected name
SecureStack C2 Configuration Guide 5-49
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoassignthename“group1”toprotectedportgroup1:
C2(rw)->set port protected name 1 group1
show port protected name
Usethiscommandtodisplaythenameforthegroupidsspecified.
Syntax
show port protected name group-id
Parameters
Defaults
None.
Mode
Read‐only.
Example
Thisexampleshowshowtoshowthenameofprotectedportgroup1:
C2(ro)->show port protected name 1
Group ID Group Name
-----------------------------
1 group1
clear port protected name
Usethiscommandtoclearthenameofaprotectedgroup.
Syntax
clear port protected name group-id
Parameters
Defaults
None.
group‐id Specifiestheidofthegrouptodisplay.Idcanrangefrom0to2.
group‐id Specifiestheidofthegroupforwhichtoclearthename.Idcanrange
from0to2.